notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 1 of 2 SYPS-2-52HP+ 2 way-0 50 ? 10 to 540 mhz 15 watt power splitter/combiner surface mount electrical specifcations at 25c maximum ratings operating temperature -40c to 65c storage temperature -55c to 100c power input (as a splitter) 1 15w max. internal dissipation 6w max. outline drawing outline dimensions ( ) inch mm electrical schematic rev. b m151107 SYPS-2-52HP+ ed-14605/2 wp/td/am 151006 case style: ah1647 features ? wideband, 10 to 540 mhz ? low insertion loss, 0.5 db typ. ? excellent amplitude unbalance, 0.1 db typ. ? high power input, 15 watt ? high power combiner, 3 watt each port ? good isolation, 20 db typ. applications ? vhf/uhf ? communications systems ? receivers & transmitters ? instrumentation ? military mobile pin connections sum port 1 output port 1 4 output port 2 5 ground 2,3,6,7 isolation (not used) 8 demo board mcl p/n: tb-655+ suggested pcb layout (pl-359) refer to application note: an-00-017 a bc e fgh j k .433 .690 .415 .100 .476 .394 .045 .060 .276 11.00 17.53 10.54 2.54 12.09 10.01 1.14 1.52 7.01 lmnpqrstwt .194 .257 .560 .475 .561 .258 .069 .061 grams 4.93 6.53 14.22 12.07 14.25 6.55 1.75 1.55 2.80 sugges t ed l a y o ut, t o l e r a nce t o b e w i t hi n . 002 pcb l an d p atte r n permanent damage may occur if any of these limits are exceeded. parameter frequency (mhz) min. typ. max. unit frequency range 10 540 mhz insertion loss above 3.0 db 10-30 0.2 0.5 db 30-250 0.3 0.7 250-540 0.5 1.1 isolation 10-30 14 19 db 30-250 18 25 250-540 15 19 phase unbalance 10-30 2 5 degree 30-250 1 4 250-540 1.5 5 amplitude unbalance 10-30 0.15 0.4 db 30-250 0.1 0.4 250-540 0.1 0.4 vswr (port s) 10-30 1.2 1.4 :1 30-250 1.25 1.45 250-540 1.35 1.65 vswr (port 1-2) 10-30 1.4 1.9 :1 30-250 1.1 1.3 250-540 1.1 1.3 ip3 10-30 45 50 dbm 30-540 52 60 1. the user must provide adequate means of heat removal to limit the temperature of ground connections under the pcb to 70c, in order to ensure proper performance. at 25c ambient temperature this requires thermal resistance of the user 's pc board heat sink to be 8c/w. inch mm +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com page 2 of 2 typical performance data frequency (mhz) total loss 1 (db) amplitude unbalance (db) isolation (db) phase unbalance (deg.) vswr s vswr 1 vswr 2 s-1 s-2 10.00 3.03 3.22 0.19 16.55 2.42 1.18 1.51 1.66 20.00 3.08 3.15 0.07 23.20 1.28 1.10 1.23 1.29 30.00 3.10 3.15 0.05 29.09 0.74 1.09 1.14 1.17 50.00 3.15 3.21 0.05 34.84 0.20 1.08 1.08 1.10 70.00 3.18 3.24 0.07 32.29 0.03 1.09 1.08 1.10 90.00 3.19 3.26 0.06 30.46 0.09 1.11 1.07 1.09 150.00 3.22 3.29 0.06 26.57 0.36 1.15 1.06 1.08 200.00 3.26 3.32 0.06 24.16 0.49 1.20 1.06 1.08 250.00 3.29 3.36 0.06 22.43 0.64 1.25 1.06 1.09 300.00 3.34 3.39 0.05 21.11 0.76 1.29 1.06 1.09 360.00 3.40 3.44 0.04 20.03 0.87 1.33 1.05 1.10 400.00 3.44 3.47 0.03 19.52 0.96 1.35 1.05 1.10 460.00 3.51 3.52 0.01 19.08 1.07 1.36 1.04 1.09 512.00 3.59 3.56 0.02 18.80 1.16 1.35 1.03 1.08 540.00 3.65 3.60 0.05 18.61 1.22 1.34 1.03 1.07 1. total loss = insertion loss + 3db splitter theoretical loss. SYPS-2-52HP+ total loss 2.5 3.0 3.5 4.0 4.5 5.0 0 60 120 180 240 300 360 420 480 540 frequency (mhz) total loss (db) s-1 s-2 SYPS-2-52HP+ isolation 0 10 20 30 40 50 0 60 120 180 240 300 360 420 480 540 frequency (mhz) isolation (db) SYPS-2-52HP+ vswr 1.0 1.2 1.4 1.6 1.8 2.0 0 60 120 180 240 300 360 420 480 540 frequency (mhz) vswr #s-vswr #1-vswr #2-vswr SYPS-2-52HP+ SYPS-2-52HP+ ip3 30.0 40.0 50.0 60.0 70.0 80.0 90.0 100.0 0 60 120 180 240 300 360 420 480 540 frequency (mhz) ip3 (dbm)
|
